Barco ScreenPRO-II Controller with Tally


This device adds flexibility and greater control to multi-screen and single screen events.

The controller enhances PIP and KEY placement, source switching, and layer control options during a presentation. The ScreenPRO-II Controller includes access to 36 presets, available to the operator at a touch of a button. Preset recalls include items such as sources, layer functions and transition effects simplifying the control of single screen or multi-screen events.

The controller also allows for remote switching of the MatrixPRO routers encasing the total flexibility and capacity of the presentation system. The controller works with up to 16 inputs, any mixture of RGBHV analog signals and SDI/ HDSDI, DVI signals, from both external routers and the built in routers of the ScreenPRO II.

The ScreenPRO II controller is available with a tally and a PS2 Keyboard card. The tally card triggers tally lights on Camera CCU units or other devices. The PS/2 Port allows for a PS/2 keyboard to be connected simplifying setup functions.

Combined with the ScreenPRO-II Processors and a BlendPRO-II, the ScreenPRO-II Controller can manage blended screens up to 4 projectors wide. In addition, the controller can manage four auxillary outputs when used with an external router. If needed, the ScreenPRO-II controller can tie in ImagePRO processors to the AUX outputs so that all signals are scaled to a preset resolution and format.


Backup option to removable Media Card
Four (4) AUX output control
3.8" LCD Display with eight (8) buttons and two (2) knobs for easy set up
External router control via Ethernet or RS-232
Control of BlendPRO-II system

Technical Specification

Video Routing Input capability: Up to 16 input sources
Output destinations: 1-4 ScreenPRO II processors
External router Control: Up to 3 External Routers: 1 Analog, 1 SDI/ HDSDI, 1 DVI
Operator Control Display: 3.8" LCD Touch Screen
Joystick: 3-Axis (X,Y and Z)
T-Bar: Analog T-Bar with smooth movement
Presets: 36 (6 pages of 6 Presets)
Destinations: 8 Total Destinations (4 ScreenPRO II and 4 AUX)
Control/Remote Ethernet: 1 RJ-45 (F) connector, running 10/100 Base-T, half/full duplex w/ auto detect
Ethernet Protocol: ICMP (ping), TCP/Ethernet Protocol CP/IP, Telnet
Serial Control Ports: 2- RS-232 ports, each 9-pin female D connector
Baud rate and Protocol: 115K Baud, 8-bit, 1 stop, no parity selectable
Backup option: Removable Media Card, Type 1 Compact Flash Compliant
Enclosure Dimensions (H x W x D): 5.95" x 17" x 10" (2U high) 15.13cm x 43.2cm x 25.4cm
Weight: 12 lbs (5.45 kg)
Console Light: XLR type Connector
Environmental Temperature: 0-40° C
Environmental Humidity: 0-95%, non-condensing
Power Type: 100-240 VAC – 50/60 Hz. Auto Selecting 1.0A Max
Remote Programming Serial Control Port: RS-232, 9Pin Female D connector
Baud rate and Protocol: 115kb/sec, 8-bit, 1 stop bit, no parity selectable
Back to equipment list
Registered in England: 1983765 | VAT Registration: GB 421 628 766
Copyright © QED Productions 2022